Overview of Distribution and Power Systems in Network Infrastructure - Make Questions

Distribution Systems
Objectives:
● 2.4 - Explain important factors of physical installations
● 5.5 - Given a scenario, use the appropriate tool or protocol to solve networking issues
● Cable Distribution Systems
○ Cable Distribution System Overview
■ Organized system connecting network backbone to end users via
distribution frames
■ Design should be hierarchical for logical and functional placement within
buildings
○ Components of Cable Distribution Systems
■ Demarcation Point
● Location at which the Internet Service Provider (ISP) connection
ends, and network infrastructure and cabling actually begins
● Marks entrance of WAN into facility
● Responsibility shifts to organization beyond this point
■ Main Distribution Frame (MDF)
● Primary starting point for interior cabling distribution
● Houses main point of presence router and backbone switch
○ Backbone switch connects all network components
75
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
■ Intermediate Distribution Frame (IDF)
● Branches out from MDF to serve smaller areas
● Contains edge switches for local connections
● Cable Trays
○ A unit or assembly of units that form a rigid structural
system to securely support the cables and raceways
■ Horizontal – installed in drop ceilings or beneath
raised floors
■ Vertical – vertical cross-connect, minimizing vertical
cable crossings between floors
■ Racks
● Hold network equipment for efficient space management
● Various types:
○ 2-post – for lighter equipment/patch pannels/network
cabling
○ 4-post – for heavier equipment
○ Wall-mounted – space-saving solution for smaller
equipment
○ Rack enclosures – for high-value equipment
■ Patch Panels
● Organize and facilitate connections within network infrastructure
76
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
● Utilize both sides
○ Front – network jacks (RJ-45 network ports)
○ Back – 110 punchdown block
● 110 Block
○ A type of punchdown block used for both voice and data
applications that rely on CAT 5 or newer copper-based
networks
○ Installed using a punchdown tool
● Preferred over direct connections for network maintenance and
port protection
■ Fiber Distribution Panels
● Facilitate fiber connections without punchdown blocks
● Uses SC, LC, ST, or MTRJ
● Can act as a converter for types of fiber connection
○ Cable Distribution Process
■ Computer connected to wall jack using straight-through patch cable
(copper or fiber)
■ Wall jack terminates cable into punch down block
■ Cable runs through walls, ceilings, or raised floor, across cable trays to
intermediate distribution frame
■ Cable terminated into patch panel's punch down block
77
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
■ Another patch cable connects patch panel to open port on edge switch in
intermediate distribution frame
■ For fiber instead of copper, switch, patch panel, and wall jack replaced
with fiber counterparts
■ Process breaks up long cable run into multiple pieces for flexibility and
ease of repair
■ Troubleshooting and repair facilitated by multiple connection points,
avoiding full cable reruns for minor issues
● Wiring a Network Demonstration
● Testing a Network Demonstration
● Power Distribution Systems
○ Power Distribution Systems
■ Crucial for consistent and reliable power delivery
○ Uninterruptible Power Supply (UPS)
■ An electrical apparatus that provides emergency power during main
power failures
■ Offers surge protection and line conditioning
■ Typically lasts 15 to 30 minutes
■ Installed at the bottom of each rack in data centers
78
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
■ Some data centers use larger UPS systems supporting multiple racks or
the entire facility
○ Power Distribution Unit (PDU)
■ A specialized device that distributes electric power to network
components and computing equipment
■ Advanced power strips with power monitoring and control features
■ May be rack-mounted or in large cabinets for rows of servers
■ Provides surge protection but not full protection against complete power
loss
○ Generators
■ Installed outside data centers for longer-term power during outages
■ Powered by diesel, gasoline, or propane
■ Paired with UPS or battery backup for seamless power transition
■ Automatic transfer switch shifts power between UPS and generator
○ Power Load Management
■ Critical for preventing circuit overloads and ensuring efficient power
usage
■ Careful calculation and monitoring of power loads on circuits
■ New equipment installations require assessing power impact and
balancing loads across data center
79
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
○ Voltage Considerations
■ Voltage
● Electric potential difference crucial in power distribution
● US standard – 120 volts
● European standard – 230 volts
■ Equipment must match voltage standards to operate properly
■ Dual voltage equipment can operate on both standards
■ Mismatched voltage can damage or destroy equipment
○ Key Considerations
■ Install UPS, PDU, and backup generator for comprehensive power
management
■ Ensure seamless power transition and protection against outages for data
center reliability
■ Consider power loads and voltage requirements before equipment
installation
● Heating, Ventilation, and Air (HVAC) Systems
○ Heating Ventilation and Air Conditioning (HVAC) system
■ Technology designed for indoor environmental comfort that provides
temperature control, humidity management, and airflow regulation
■ Important for hardware and networking devices
80
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
○ Temperature Control
■ Crucial for electronic equipment, including computer networks and data
centers
■ Overheating can lead to hardware malfunctions and reduced efficiency
■ Maintain a steady temperature for peak efficiency
● Typically 68-77°F or 20-25°C
● Check equipment manufacturer's recommendations for specific
temperature set points
○ Humidity Levels
■ Humidity
● Refers to the concentration of water vapor in the air
■ Too much humidity can cause condensation, leading to corrosion or
electrical shorts
■ Too little humidity can cause static buildup, potentially damaging
sensitive electronics
■ Maintain relative humidity level of 40-60%
○ Airflow Management
■ Important for dissipating heat generated by equipment in data centers
■ Proper airflow management is crucial to prevent overheating or system
shutdowns
81
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
■ Port-side Exhaust and Intake (“Hot/cold aisle” Configuration)
● Strategic method of air distribution in which server racks are
positioned in alternating rows with cold and hot air
● Maximizes cooling efficiency
● Reduces energy consumption
○ Design Considerations
■ Plan data center layouts with HVAC factors in mind
■ Proper rack spacing and orientation for efficient airflow
■ Use raised floor systems to push cold air upward into racks and expel hot
air
■ Configure ceiling plenums to return cooled air to the data center
○ Integration of HVAC system is imperative for uninterrupted operation and
optimal performance of network and data center equipment
● Fire Suppression Systems
○ Fire Suppression System
■ Crucial for data centers
○ Wet Pipe System
■ Most basic type of fire suppression system
■ Involves sprinkler system with pipes always containing water
■ Activation occurs when fire alarm triggers valve opening, releasing water
82
https://www.DionTraining.com
CompTIA Network+
(N10-009) (Study Notes)
■ Common in traditional office buildings but poses risk of water damage to
equipment
○ Pre-action System
■ Aim to minimize accidental releases
■ Requires both detector actuation (e.g., smoke detector) and sprinkler
activation before water release
■ Offers enhanced security similar to two-factor authentication for fire
system
○ Special Suppression System
■ Utilize clean agents like halon, carbon agent, or inert gas
■ Displaces oxygen in the room, suffocating fire
■ Presents suffocation risk to people
● Requires alarms and supplemental oxygen for personnel
○ Safety Measures
■ Install clean agent systems to prevent water damage to equipment
■ Ensure systems are professionally installed and annually inspected
■ Be prepared for potential fire incidents by having suppression systems
ready for use
○ While hoping to avoid fire incidents, it's crucial to have properly installed and
maintained fire suppression systems in data centers to mitigate risks effectively

Overview of Distribution and Power Systems in Network Infrastructure

51 questions